5 Replies to “How can gold bracelets be cleaned to be cleaner and brighter?

  1. 1. If it is just ordinary dust, you can use a soft towel to dip a little warm water and gently wipe the surface. You can also use a jewelry brush to gently brush the surface to clean the dust on the surface

    2. If the surface of gold jewelry begins to darken and lose luster, you can first prepare some soapy water and add a small amount of alcohol to wash the gold jewelry, and finally wipe the gold jewelry with a soft cloth

    3. Toothpaste can also clean jewelry. However, toothpaste without particles should be used. The hardness of the toothpaste particles is very high. If the gold surface is directly cleaned, it will cause wear to the gold jewelry. After applying toothpaste to the surface of gold jewelry, gently wipe it with a soft cloth, and finally rinse it with water

    4. When wearing gold jewelry, the surface occasionally turns white, which is caused by the trace mercury contained in the cosmetics. In this case, the gold is baked in the fire and then wiped with a soft cloth to restore the original luster

    5. You can remove the dirt on the surface of jewelry by purchasing professional jewelry cleaner and operating according to the instructions

    the most important thing to maintain gold jewelry is to clean it regularly, especially if it is not worn for a long time, the jewelry should be wiped clean first and then put into the jewelry box

  2. 1. Soapy water cleaning method

    if the surface of the gold bracelet is dull, you can add a little alcohol to the soapy water, then rinse the gold bracelet, and finally wipe the necklace with a soft cloth to make the gold jewelry bright

    2. Salt and vinegar cleaning method

    both salt and vinegar have good decontamination effects. You can mix an appropriate amount of salt and vinegar into a cleaning agent, and then use a soft cloth or a soft bristled toothbrush to dip in a solvent to wipe the pure gold bracelet, which can keep the jewelry bright for a long time

    precautions for the maintenance of gold jewelry

    1. Avoid direct contact with high volatile substances such as perfume and hair gel, or it will easily lead to the fading of gold jewelry

    2. When swimming, take off the gold ornaments to avoid chemical changes on the surface after touching the seawater or pool water

    3. Wrap it with flannelette and put it into the jewelry box to avoid mutual friction and damage

    4. Gold is soft and easy to deform, so don't pull necklaces and other accessories to avoid deformation

  3. 1. Toilet water is actually a good thing to clean gold. You can dip some toilet water and wipe gold jewelry. Or add some warm water with detergent, wipe the gold with a fine toothbrush, soak it for 15 minutes, and then carefully wipe it with a soft cloth

    2. If there is a black silver film on the surface of the gold jewelry, use 2G of salt, 7g of baking soda, 8g of bleaching powder and 60ml of water to prepare a "gold cleaning agent". Put the gold jewelry into a bowl and pour the cleaning agent. After 2 hours, take out the gold jewelry, rinse it with water (preferably not hard water), bury it in wood chips and dry it, and then wipe it with a soft cloth

    2. Toothpaste whitening agent and friction agent can just play a role against the dirt on gold jewelry. The use method of toothpaste is very simple. First, squeeze an appropriate amount of toothpaste into a small container, pour an appropriate amount of warm water into it, mix it evenly with the waste toothpaste, and then put the dirty gold jewelry into it for a while, about ten to twenty minutes. It's almost time. Take this toothbrush to brush the fine parts of the jewelry, and the gold jewelry will become bright

    maintenance of gold bracelets:

    1. Avoid contact with chemicals and stains

    chemicals in life, including hand cream, perfume, and detergent, will actually oxidize gold bracelets. Some components in the air and our sweat will also slowly oxidize the gold bracelet, and there are also some stains and sweat stains, which will cause the gold bracelet to lose luster over a long period of time. These problems are difficult to avoid completely, but we can still try to do some. For example, when washing dishes, washing hair and bathing, take off the gold bracelets and do not wear them for washing; When applying hand cream, avoid bracelets; When the bracelet is not worn for the time being, do not put it anywhere at will, but put it away in a jewelry box

    2. Regular cleaning

    is also very important. You can clean the gold bracelet with toothpaste everyday, but you should avoid using toothpaste with frosting effect, otherwise it will cause certain losses to the bracelet. You can also clean the bracelet with mild soapy water, which is more convenient. Of course, if it is troublesome, you can take the bracelet to a professional cleaning shop for cleaning, and the bracelet will be as clean as new

  4. Maintenance method:
    1. To remove dust, clean the dust and scale of gold jewelry. The simplest method is to gently scrub with a soft brush dipped in hot water. It is best to scrub with a degreasing cotton ball dipped in soapy water and anhydrous alcohol. However, it is not allowed to scrub with abrasive particles (such as toothpaste, polishing paste, fine sandpaper or fine abrasive cloth) to avoid reducing the weight of gold and causing losses
    2. Washing of pure gold: when washing pure gold necklaces, first put the pure gold necklaces into the container, then add water to the container, then add a small amount of ammonia, then close the mouth, shake it vigorously back and forth, and then take it out to dry. When wearing a gold necklace, you should also maintain the buckle switch and regularly drip a little sewing oil to the switch to prevent the micro spring in the switch from rusting
    3. Removal of white spots on gold jewelry: some cosmetics on the market contain trace amounts of mercury (mercury), such as phenyl hydroxy mercury and mercury dichloride in the freckle cream, and the gold jewelry will appear white spots or turn white after contact. At this time, do not use a knife or sandpaper to polish. As long as the jewelry with white spots or whitening is baked in the fire, and then wiped with a soft cloth, the gold jewelry will restore its original luster
    4. Dirt on the surface clean the surface of gold jewelry, which will make the color dim. At this time, the developer powder for developing photos can be mixed with 30-40 ~ C warm water to make a developing solution, and then diluted with one time of water. Put the gold jewelry with dirt in it for 4-6 minutes, brush the dirt with a soft brush, and rinse it with water for several times. If you dip nail polish with a woolen cloth, the jewelry will be brighter
    5. Soak cleaning: first take 1000 ml of warm boiled water (40 ~ C), then add 200 ml of glacial acetic acid to make an aqueous solution, then put the gold jewelry into this cleaning solution for 10 minutes, then brush it with a brush, and finally rinse it with clean water

Leave a Reply